HP StorageWorks 2/32 - SAN Switch 릴리스 노트 - 페이지 4
{카테고리_이름} HP StorageWorks 2/32 - SAN Switch에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks 2/32 - SAN Switch 32 페이지. Fabric manager version 3.0.x release notes
HP StorageWorks 2/32 - SAN Switch에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (20 페이지), 사용자 설명서 (22 페이지), 펌웨어 릴리스 노트 (14 페이지), 릴리스 노트 (48 페이지), 설치 지침 매뉴얼 (6 페이지), 릴리스 노트 (14 페이지), 릴리스 노트 (4 페이지)
페이지 인쇄
Firmware Version 4.0.2b Overview
Firmware Version 4.0.2b Overview
The hp StorageWorks SAN Switch 2/32 ships with Version 4.0.2b firmware.
Firmware improvements per this release involve:
•
link initialization
•
API
•
SNMP
•
help
•
firmware download
•
web server security.
Prerequisites for Upgrading or Restoring Firmware
Read this section before upgrading/restoring switch firmware.
Verify that a Windows NT or 2000 FTP Server is Installed
An FTP server must be installed and running when performing the Telnet command
configUpload on a Windows NT or 2000 system. If you do not have a Microsoft
Windows NT or 2000 FTP service previously installed on your system, you need to
install it.
Use the following steps to install and configure a Windows NT or 2000 FTP server.
1. Create a folder for the switch firmware and configuration files.
2. Install the Windows NT or 2000 FTP server on your system from your Windows
installation CD.
NOTE: If you only use the FTP server for the firmware and configuration loads, you can
specify the folder created in Step 1 as the FTP Publish Directory.
3. Open the Internet Service Manager Tool.
4. Issue the configUpload command. Save the configuration.
4
SAN switch 2/32, version 4.0.2b release notes