HP StorageWorks 2/32 - SAN Switch Release Release - Pagina 4

Blader online of download pdf Release Release voor {categorie_naam} HP StorageWorks 2/32 - SAN Switch. HP StorageWorks 2/32 - SAN Switch 32 pagina's. Fabric manager version 3.0.x release notes
Ook voor HP StorageWorks 2/32 - SAN Switch: Handleiding voor installatie-instructies (20 pagina's), Gebruikershandleiding (22 pagina's), Opmerkingen over firmware-uitgave (14 pagina's), Release Release (48 pagina's), Handleiding voor installatie-instructies (6 pagina's), Release Release (14 pagina's), Release Release (4 pagina's)

Firmware Version 4.0.2b Overview

The hp StorageWorks SAN Switch 2/32 ships with Version 4.0.2b firmware.

Firmware improvements per this release involve:

•

link initialization

•

API

•

SNMP

•

help

•

firmware download

•

web server security.

Read this section before upgrading/restoring switch firmware.

Verify that a Windows NT or 2000 FTP Server is Installed

An FTP server must be installed and running when performing the Telnet command

configUpload on a Windows NT or 2000 system. If you do not have a Microsoft

Windows NT or 2000 FTP service previously installed on your system, you need to

install it.

Use the following steps to install and configure a Windows NT or 2000 FTP server.

1. Create a folder for the switch firmware and configuration files.

2. Install the Windows NT or 2000 FTP server on your system from your Windows

installation CD.

NOTE: If you only use the FTP server for the firmware and configuration loads, you can

specify the folder created in Step 1 as the FTP Publish Directory.

3. Open the Internet Service Manager Tool.

4. Issue the configUpload command. Save the configuration.

SAN switch 2/32, version 4.0.2b release notes