Olympus BH2 Series Pembongkaran, Pembersihan, dan Pemasangan Kembali Lengkap - Halaman 18

Jelajahi secara online atau unduh pdf Pembongkaran, Pembersihan, dan Pemasangan Kembali Lengkap untuk Mikroskop Olympus BH2 Series. Olympus BH2 Series 40 halaman. Phase contrast
Juga untuk Olympus BH2 Series: Panduan Pemecahan Masalah & Penyesuaian (46 halaman), Pembongkaran, Pembersihan, dan Pemasangan Kembali Lengkap (23 halaman), Pembongkaran, Pembersihan, dan Pemasangan Kembali (45 halaman), Manual (6 halaman), Panduan Instalasi (9 halaman)

Reassemble the Fine-Focus Gear Cluster

Apply fresh grease to the lower support pin of the

bottom (left-most) drive gear (see

Figure 41 – Grease lower pin of bottom (left-most) gear

Place the bottom drive gear in the left-most position in

the aluminum gear-support base (see

proper orientation of the gear).

Figure 42 – Place bottom (left-most) drive gear in position

Apply fresh grease to the lower support pin of the

middle drive gear (see

Figure

Figure 43 – Grease the lower pin of the middle gear

Place the middle drive gear in the center position in the

gear-support base (see

orientation of the gear).

Complete Teardown, Cleaning, and Reassembly of the Olympus BH-2 Coaxial Focus Mechanism

Figure

41).

Figure 42

for the

43).

Figure 44

for the proper

Figure 44 – Place the middle drive gear in position

Apply fresh grease to the lower support pin of the top

(right-most) drive gear (see

Figure 45 – Grease lower pin of top (right-most) drive gear

Place the top drive gear in the right-most position in the

gear-support base (see

orientation of the gear).

Figure 46 – Place top (right-hand) drive gear in position

Apply fresh grease to the top support pins of all three

drive gears (see

Figure

47).

Figure

45).

Figure 46

for the proper

Revision 4

Page 18 of 40