Olympus BH2 Series Kompletny demontaż, czyszczenie i ponowny montaż - Strona 18

Przeglądaj online lub pobierz pdf Kompletny demontaż, czyszczenie i ponowny montaż dla Mikroskop Olympus BH2 Series. Olympus BH2 Series 40 stron. Phase contrast
Również dla Olympus BH2 Series: Instrukcja rozwiązywania problemów i regulacji (46 strony), Kompletny demontaż, czyszczenie i ponowny montaż (23 strony), Demontaż, czyszczenie i ponowny montaż (45 strony), Podręcznik (6 strony), Instrukcja instalacji (9 strony)

Reassemble the Fine-Focus Gear Cluster

Apply fresh grease to the lower support pin of the

bottom (left-most) drive gear (see

Figure 41 – Grease lower pin of bottom (left-most) gear

Place the bottom drive gear in the left-most position in

the aluminum gear-support base (see

proper orientation of the gear).

Figure 42 – Place bottom (left-most) drive gear in position

Apply fresh grease to the lower support pin of the

middle drive gear (see

Figure

Figure 43 – Grease the lower pin of the middle gear

Place the middle drive gear in the center position in the

gear-support base (see

orientation of the gear).

Complete Teardown, Cleaning, and Reassembly of the Olympus BH-2 Coaxial Focus Mechanism

Figure

41).

Figure 42

for the

43).

Figure 44

for the proper

Figure 44 – Place the middle drive gear in position

Apply fresh grease to the lower support pin of the top

(right-most) drive gear (see

Figure 45 – Grease lower pin of top (right-most) drive gear

Place the top drive gear in the right-most position in the

gear-support base (see

orientation of the gear).

Figure 46 – Place top (right-hand) drive gear in position

Apply fresh grease to the top support pins of all three

drive gears (see

Figure

47).

Figure

45).

Figure 46

for the proper

Revision 4

Page 18 of 40