Olympus BH2 Series Komple Söküm, Temizlik ve Yeniden Montaj - Sayfa 18

Mikroskop Olympus BH2 Series için çevrimiçi göz atın veya pdf Komple Söküm, Temizlik ve Yeniden Montaj indirin. Olympus BH2 Series 40 sayfaları. Phase contrast
Ayrıca Olympus BH2 Series için: Sorun Giderme ve Ayarlama Kılavuzu (46 sayfalar), Komple Söküm, Temizlik ve Yeniden Montaj (23 sayfalar), Söküm, Temizlik ve Yeniden Montaj (45 sayfalar), Manuel (6 sayfalar), Kurulum Kılavuzu (9 sayfalar)

Sayfayı Yazdır
Olympus BH2 Series Komple Söküm, Temizlik ve Yeniden Montaj

Reassemble the Fine-Focus Gear Cluster

Apply fresh grease to the lower support pin of the
bottom (left-most) drive gear (see
Figure 41 – Grease lower pin of bottom (left-most) gear
Place the bottom drive gear in the left-most position in
the aluminum gear-support base (see
proper orientation of the gear).
Figure 42 – Place bottom (left-most) drive gear in position
Apply fresh grease to the lower support pin of the
middle drive gear (see
Figure
Figure 43 – Grease the lower pin of the middle gear
Place the middle drive gear in the center position in the
gear-support base (see
orientation of the gear).
Complete Teardown, Cleaning, and Reassembly of the Olympus BH-2 Coaxial Focus Mechanism
Figure
41).
Figure 42
for the
43).
Figure 44
for the proper
Figure 44 – Place the middle drive gear in position
Apply fresh grease to the lower support pin of the top
(right-most) drive gear (see
Figure 45 – Grease lower pin of top (right-most) drive gear
Place the top drive gear in the right-most position in the
gear-support base (see
orientation of the gear).
Figure 46 – Place top (right-hand) drive gear in position
Apply fresh grease to the top support pins of all three
drive gears (see
Figure
47).
Figure
45).
Figure 46
for the proper
Revision 4
Page 18 of 40