Olympus CIX100 Manual Pengaturan Sistem - Halaman 19

Jelajahi secara online atau unduh pdf Manual Pengaturan Sistem untuk Peralatan Laboratorium Olympus CIX100. Olympus CIX100 38 halaman. Cleanliness inspector system
Juga untuk Olympus CIX100: Panduan Instalasi (14 halaman), Petunjuk Manual (46 halaman)

Halaman Cetak

4.3

Connecting the power cord

Attention

Make sure that the mains power supply where you are corresponds with the

power supply required by each of the components.

Caution

Always use the power cord provided by Olympus.

The electrical safety and electromagnetic compatibility of the device can not

be guaranteed if an unsuitable power cord or any other unsuitable cables

are used. If no suitable power cord has been provided, you can find details

of suitable power cords on page 32 of the "Proper selection of the power

supply cord" chapter.

1. Microscope: Before connecting the power cord make sure that the

microscope's main switch is off, (O).

2. Connect the microscope to the power socket using the power cord.

3. Control box: Connect the control box to the power socket using the

power cord.

4. Monitor: Connect the monitor to the power socket using the power

cord.

5. Computer: Connect the computer to the power socket using the

power cord.

 You have now connected all of the components and can switch on

the system in the next step.

OLYMPUS Cleanliness Inspector CIX100

4 Setting up the system

System Setup Guide