Olympus CIX100 Руководство по настройке систем - Страница 19
Просмотреть онлайн или скачать pdf Руководство по настройке систем для Лабораторное оборудование Olympus CIX100. Olympus CIX100 38 страниц. Cleanliness inspector system
Также для Olympus CIX100: Руководство по установке (14 страниц), Руководство по эксплуатации (46 страниц)
Печатать страницу
4.3
Connecting the power cord
Attention
Make sure that the mains power supply where you are corresponds with the
power supply required by each of the components.
Caution
Always use the power cord provided by Olympus.
The electrical safety and electromagnetic compatibility of the device can not
be guaranteed if an unsuitable power cord or any other unsuitable cables
are used. If no suitable power cord has been provided, you can find details
of suitable power cords on page 32 of the "Proper selection of the power
supply cord" chapter.
1. Microscope: Before connecting the power cord make sure that the
microscope's main switch is off, (O).
2. Connect the microscope to the power socket using the power cord.
3. Control box: Connect the control box to the power socket using the
power cord.
4. Monitor: Connect the monitor to the power socket using the power
cord.
5. Computer: Connect the computer to the power socket using the
power cord.
You have now connected all of the components and can switch on
the system in the next step.
19
OLYMPUS Cleanliness Inspector CIX100
4 Setting up the system
System Setup Guide