Olympus CIX100 시스템 설정 매뉴얼 - 페이지 19
{카테고리_이름} Olympus CIX100에 대한 시스템 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CIX100 38 페이지. Cleanliness inspector system
Olympus CIX100에 대해서도 마찬가지입니다: 설치 매뉴얼 (14 페이지), 사용 설명서 (46 페이지)
페이지 인쇄
4.3
Connecting the power cord
Attention
Make sure that the mains power supply where you are corresponds with the
power supply required by each of the components.
Caution
Always use the power cord provided by Olympus.
The electrical safety and electromagnetic compatibility of the device can not
be guaranteed if an unsuitable power cord or any other unsuitable cables
are used. If no suitable power cord has been provided, you can find details
of suitable power cords on page 32 of the "Proper selection of the power
supply cord" chapter.
1. Microscope: Before connecting the power cord make sure that the
microscope's main switch is off, (O).
2. Connect the microscope to the power socket using the power cord.
3. Control box: Connect the control box to the power socket using the
power cord.
4. Monitor: Connect the monitor to the power socket using the power
cord.
5. Computer: Connect the computer to the power socket using the
power cord.
You have now connected all of the components and can switch on
the system in the next step.
19
OLYMPUS Cleanliness Inspector CIX100
4 Setting up the system
System Setup Guide