Olympus U-UCD8A Petunjuk Manual - Halaman 37

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Peralatan Laboratorium Olympus U-UCD8A. Olympus U-UCD8A 40 halaman. Motorized universal condenser

Halaman Cetak

6-3 Mounting the Condenser

Fig. 12

Also refer to the instruction manual for the microscope in use.

Attach the condenser to the condenser holder in accordance

with the following procedure.

1. Press the stage UP botton @ to raise the stage to a height

where it does not hit the objective. Then rotate the condenser

up/down screw ² on the microscope to lower the condenser

holder to the position of the lowest stopper.

2. Using the Allen screwdriver, loosen the clamping screw ³ on

the right side of the condenser holder.

3. Swing out the top lens of the condenser by motorized operation.

4. Insert the condenser in the mounting dovetail of the condenser

holder, and press horizontally until the positioning pin of the

condenser is engaged in the positioning groove of the mount-

ing dovetail.

5. Tighten the clamping screw ³ on the right side of the con-

denser holder.

6. Raise the condenser holder by rotating the condenser up/

down screw ².

U-UCD8A

(Fig. 12)