Cisco 3750 - Catalyst EMI Switch Panduan Instalasi - Halaman 43

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Cisco 3750 - Catalyst EMI Switch. Cisco 3750 - Catalyst EMI Switch 47 halaman. Catalyst 3750 series switches
Juga untuk Cisco 3750 - Catalyst EMI Switch: Lembar data (18 halaman), Faq (10 halaman), Buletin Produk (5 halaman), Buletin Dukungan Produk (6 halaman), Ikhtisar Produk (25 halaman), Deskripsi (1 halaman), Lembar data (23 halaman), Buletin Dukungan Produk (6 halaman), Panduan Memulai (27 halaman), Lembar data (23 halaman), Panduan Memulai (33 halaman)

Chapter 3

Switch Installation

Step 2

Step 3

Step 4

Figure 3-38 Connecting to an Ethernet Port

78-15136-01

Connect the other end of the cable to an RJ-45 connector on the other device. The

port LED turns on when both the switch and the connected device have

established link.

The port LED is amber while Spanning Tree Protocol (STP) discovers the

topology and searches for loops. This takes about 30 seconds, and then the port

LED turns green. If the port LED does not turn on, the device at the other end

might not be turned on, or there might be a cable problem or a problem with the

adapter installed in the attached device. See

solutions to cabling problems.

Reconfigure and reboot the connected device if necessary.

Repeat Steps 1 through 3 to connect each device.

S Y S T

R P S

M A S T R

S T A T

D U P L X

S P E E D

S T A C K

M O D E

Connecting to the 10/100 and 10/100/1000 Ports

Chapter 4, "Troubleshooting,"

Catalyst 3750 Switch Hardware Installation Guide

1 0

1 1

3-43

for

1 2

11 X

12 X