Cisco 3750 - Catalyst EMI Switch 설치 매뉴얼 - 페이지 43

{카테고리_이름} Cisco 3750 - Catalyst EMI Switch에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3750 - Catalyst EMI Switch 47 페이지. Catalyst 3750 series switches
Cisco 3750 - Catalyst EMI Switch에 대해서도 마찬가지입니다: 데이터시트 (18 페이지), 자주 묻는 질문 (10 페이지), 제품 게시판 (5 페이지), 제품 지원 게시판 (6 페이지), 제품 개요 (25 페이지), 설명 (1 페이지), 데이터시트 (23 페이지), 제품 지원 게시판 (6 페이지), 시작하기 매뉴얼 (27 페이지), 데이터시트 (23 페이지), 시작하기 매뉴얼 (33 페이지)

Chapter 3

Switch Installation

Step 2

Step 3

Step 4

Figure 3-38 Connecting to an Ethernet Port

78-15136-01

Connect the other end of the cable to an RJ-45 connector on the other device. The

port LED turns on when both the switch and the connected device have

established link.

The port LED is amber while Spanning Tree Protocol (STP) discovers the

topology and searches for loops. This takes about 30 seconds, and then the port

LED turns green. If the port LED does not turn on, the device at the other end

might not be turned on, or there might be a cable problem or a problem with the

adapter installed in the attached device. See

solutions to cabling problems.

Reconfigure and reboot the connected device if necessary.

Repeat Steps 1 through 3 to connect each device.

S Y S T

R P S

M A S T R

S T A T

D U P L X

S P E E D

S T A C K

M O D E

Connecting to the 10/100 and 10/100/1000 Ports

Chapter 4, "Troubleshooting,"

Catalyst 3750 Switch Hardware Installation Guide

1 0

1 1

3-43

for

1 2

11 X

12 X