Cisco 3750 - Catalyst EMI Switch Instrukcje instalacji - Strona 43

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Przełącznik Cisco 3750 - Catalyst EMI Switch. Cisco 3750 - Catalyst EMI Switch 47 stron. Catalyst 3750 series switches
Również dla Cisco 3750 - Catalyst EMI Switch: Arkusz danych (18 strony), Faq (10 strony), Biuletyn produktu (5 strony), Biuletyn wsparcia produktu (6 strony), Przegląd produktów (25 strony), Opis (1 strony), Arkusz danych (23 strony), Biuletyn wsparcia produktu (6 strony), Podręcznik dla początkujących (27 strony), Arkusz danych (23 strony), Podręcznik dla początkujących (33 strony)

Chapter 3

Switch Installation

Step 2

Step 3

Step 4

Figure 3-38 Connecting to an Ethernet Port

78-15136-01

Connect the other end of the cable to an RJ-45 connector on the other device. The

port LED turns on when both the switch and the connected device have

established link.

The port LED is amber while Spanning Tree Protocol (STP) discovers the

topology and searches for loops. This takes about 30 seconds, and then the port

LED turns green. If the port LED does not turn on, the device at the other end

might not be turned on, or there might be a cable problem or a problem with the

adapter installed in the attached device. See

solutions to cabling problems.

Reconfigure and reboot the connected device if necessary.

Repeat Steps 1 through 3 to connect each device.

S Y S T

R P S

M A S T R

S T A T

D U P L X

S P E E D

S T A C K

M O D E

Connecting to the 10/100 and 10/100/1000 Ports

Chapter 4, "Troubleshooting,"

Catalyst 3750 Switch Hardware Installation Guide

1 0

1 1

3-43

for

1 2

11 X

12 X