Sharp AR-C260 Panduan Manajemen Warna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Manajemen Warna untuk Semua dalam Satu Printer Sharp AR-C260. Sharp AR-C260 8 halaman. Color adjustment
Juga untuk Sharp AR-C260: Operasi Pemindai Jaringan (42 halaman), Panduan Operator Kunci (19 halaman), Panduan Pengoperasian Printer (50 halaman), Panduan Instalasi Perangkat Lunak (25 halaman), Panduan Instalasi (15 halaman), Panduan Pengguna (8 halaman)

Halaman Cetak
Sharp AR-C260 Panduan Manajemen Warna

Using Easy Calibration

Use Easy Calibration when there is only a small difference between the colours in the colour chart and the
test page printed as explained on page 3.
Follow the steps below to perform Easy Calibration using the operation panel.
1
Enter the key operator programs.
To enter the key operator programs, see "Using
the key operator programs" on page 3 of the Key
Operator's Guide.
2
Touch the [PRINTER SETTINGS] key.
3
Touch the [COLOUR ADJUSTMENTS] key.
INTERFACE SETTINGS
COLOUR ADJUSTMENTS
4
Touch the [EASY CALIBRATION] key.
KEY OPERATOR PROGRAMS
COLOUR ADJUSTMENTS
EASY CALIBRATION
TEST PRINT
5
Load A4 or letter-size paper in the tray and
touch the [EXECUTE] key.
When the [EXECUTE] key is touched, "SELF
PRINT IN PROGRESS" appears in the display.
After a brief interval, the test patterns for Easy
Calibration will be printed. (see the following
page).
OK
6
Select the grey colour that you prefer from
either of the printed test patterns (test pattern
2 or test pattern 3), and set the X and Y coor-
dinates of that colour in the following screen.
For a detailed explanation of this procedure, see
"Easy Calibration" on the following page.
How to use the keys in the screen
:Touch the
:
and
desired colour of grey.
7
Touch the [OK] key.
Your settings will be saved and you will return to
the Colour Setting screen. Print a test page as
explained on page 3 and verify that the colours
match the colours in the standard colour chart.
MEMO
If you cannot find an acceptable colour of
grey in the test patterns, adjust the colour
balance using the Colour Balance settings
as explained on page 5.
OK
,
,
keys to select the
7