- ページ 7

オール・イン・ワン・プリンター Sharp AR-C260のPDF カラーマネジメント・マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-C260 8 ページ。 Color adjustment
Sharp AR-C260 にも：ネットワークスキャナの操作 (42 ページ), キー操作マニュアル (19 ページ), プリンター操作マニュアル (50 ページ), ソフトウェア・インストール・マニュアル (25 ページ), インストレーション・マニュアル (15 ページ), ユーザーマニュアル (8 ページ)

Using Easy Calibration

Use Easy Calibration when there is only a small difference between the colours in the colour chart and the

test page printed as explained on page 3.

Follow the steps below to perform Easy Calibration using the operation panel.

Enter the key operator programs.

To enter the key operator programs, see "Using

the key operator programs" on page 3 of the Key

Operator's Guide.

Touch the [PRINTER SETTINGS] key.

Touch the [COLOUR ADJUSTMENTS] key.

INTERFACE SETTINGS

COLOUR ADJUSTMENTS

Touch the [EASY CALIBRATION] key.

KEY OPERATOR PROGRAMS

COLOUR ADJUSTMENTS

EASY CALIBRATION

TEST PRINT

Load A4 or letter-size paper in the tray and

touch the [EXECUTE] key.

When the [EXECUTE] key is touched, "SELF

PRINT IN PROGRESS" appears in the display.

After a brief interval, the test patterns for Easy

Calibration will be printed. (see the following

page).

Select the grey colour that you prefer from

either of the printed test patterns (test pattern

2 or test pattern 3), and set the X and Y coor-

dinates of that colour in the following screen.

For a detailed explanation of this procedure, see

"Easy Calibration" on the following page.

How to use the keys in the screen

:Touch the

and

desired colour of grey.

Touch the [OK] key.

Your settings will be saved and you will return to

the Colour Setting screen. Print a test page as

explained on page 3 and verify that the colours

match the colours in the standard colour chart.

MEMO

If you cannot find an acceptable colour of

grey in the test patterns, adjust the colour

balance using the Colour Balance settings

as explained on page 5.

keys to select the