Sharp AR-C260 컬러 관리 매뉴얼 - 페이지 7

{카테고리_이름} Sharp AR-C260에 대한 컬러 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-C260 8 페이지. Color adjustment
Sharp AR-C260에 대해서도 마찬가지입니다: 네트워크 스캐너 운영 (42 페이지), 주요 운영자 매뉴얼 (19 페이지), 프린터 사용 설명서 (50 페이지), 소프트웨어 설치 매뉴얼 (25 페이지), 설치 매뉴얼 (15 페이지), 사용자 설명서 (8 페이지)

Using Easy Calibration

Use Easy Calibration when there is only a small difference between the colours in the colour chart and the

test page printed as explained on page 3.

Follow the steps below to perform Easy Calibration using the operation panel.

Enter the key operator programs.

To enter the key operator programs, see "Using

the key operator programs" on page 3 of the Key

Operator's Guide.

Touch the [PRINTER SETTINGS] key.

Touch the [COLOUR ADJUSTMENTS] key.

INTERFACE SETTINGS

COLOUR ADJUSTMENTS

Touch the [EASY CALIBRATION] key.

KEY OPERATOR PROGRAMS

COLOUR ADJUSTMENTS

EASY CALIBRATION

TEST PRINT

Load A4 or letter-size paper in the tray and

touch the [EXECUTE] key.

When the [EXECUTE] key is touched, "SELF

PRINT IN PROGRESS" appears in the display.

After a brief interval, the test patterns for Easy

Calibration will be printed. (see the following

page).

Select the grey colour that you prefer from

either of the printed test patterns (test pattern

2 or test pattern 3), and set the X and Y coor-

dinates of that colour in the following screen.

For a detailed explanation of this procedure, see

"Easy Calibration" on the following page.

How to use the keys in the screen

:Touch the

and

desired colour of grey.

Touch the [OK] key.

Your settings will be saved and you will return to

the Colour Setting screen. Print a test page as

explained on page 3 and verify that the colours

match the colours in the standard colour chart.

MEMO

If you cannot find an acceptable colour of

grey in the test patterns, adjust the colour

balance using the Colour Balance settings

as explained on page 5.

keys to select the