Siemens SINAMICS S120 Manual - Halaman 16

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SINAMICS S120. Siemens SINAMICS S120 43 halaman. Applications for cabinet modules, liquid-cooled
Juga untuk Siemens SINAMICS S120: Panduan Pengoperasian (20 halaman), Memulai (32 halaman), Manual (41 halaman), Deskripsi Singkat (22 halaman), Instruksi Untuk Pemasangan Di Kabinet Untuk Aplikasi Drive Kelautan (28 halaman), Manual Aplikasi (34 halaman), Manual Aplikasi (46 halaman), Panduan Petunjuk Pengoperasian (22 halaman), Memulai (32 halaman), Panduan Petunjuk Pengoperasian (21 halaman), Manual Teknik (30 halaman), Panduan Komisioning (20 halaman)

SINAMICS S120 Fail-Safe Drives

Prerequisites for operation

•

The SIMATIC ET200S components must be mounted and con-

nected with one another, latched on the mounting rail. The

PROFIsafe addresses of the fail-safe input and output modules

must be set using the DIL switch; also refer to Chapter 6.2

Hardware configuration of the fail-safe control.

•

All of the components are connected-up as explained in Chapter

4.2 Connecting-up the hardware components.

•

The DRIVE-CLiQ topology of the SINAMICS components is care-

fully observed.

•

The motors are connected to the Motor Module using the power

and encoder cables.

•

The Motor Module is correctly connected to the infeed (DC link and

24 V DC control voltage).

•

The infeed is connected to the line supply.

•

The components are supplied with 24 V DC.

I DT Safety Integrated

Page 16/43

Entry ID: 28424136

MC-FE-I-005-V11-EN