Siemens 25 Panduan Servis - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Servis untuk Pengontrol Siemens 25. Siemens 25 12 halaman. Combination starters
Juga untuk Siemens 25: Suku Cadang Pengganti dan Manual Instruksi (6 halaman), Panduan Pemecahan Masalah (39 halaman)

Service Manual

Maintenance Instructions

8.9.2.1

Adjusting the friction in the arm

Turn the clamping knob (1) to loosen the friction in the arm system. After adjusting the

position of the arm the clamping knob should be tightened.

Tighten the nut (2) shown periodically using 16/17 Spanner.

In case of balancing problem contact Siemens Customer Service.

8.10 Removing the top panel , front cover and X-ray source assembly

Turn off the Multimobil 2.5,disconnect the mains chord and wind the cord around the

cable holder.

Lower the X-ray source assembly to transport position. Lock the Multimobil 2.5 by

applying the brake.

Unscrew the two ornamental screws with 2.5 mm allen key.

Grasp the top panel and lift it (as shown in figure).

Siemens Ltd. Med India

Version 6.0

8-8