Siemens 25 Service-Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Service-Handbuch für Controller Siemens 25 herunter. Siemens 25 12 Seiten. Combination starters
Auch für Siemens 25: Ersatzteile und Gebrauchsanweisung (6 seiten), Handbuch zur Fehlersuche (39 seiten)

Seite drucken

Service Manual

Maintenance Instructions

8.9.2.1

Adjusting the friction in the arm

Turn the clamping knob (1) to loosen the friction in the arm system. After adjusting the

position of the arm the clamping knob should be tightened.

Tighten the nut (2) shown periodically using 16/17 Spanner.

In case of balancing problem contact Siemens Customer Service.

8.10 Removing the top panel , front cover and X-ray source assembly

8.10.1 Removing the top panel

Turn off the Multimobil 2.5,disconnect the mains chord and wind the cord around the

cable holder.

Lower the X-ray source assembly to transport position. Lock the Multimobil 2.5 by

applying the brake.

Unscrew the two ornamental screws with 2.5 mm allen key.

Grasp the top panel and lift it (as shown in figure).

Siemens Ltd. Med India

Version 6.0

8-8