Siemens SITRANS L Series Panduan Petunjuk Pengoperasian - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Beralih Siemens SITRANS L Series. Siemens SITRANS L Series 44 halaman. Capacitance transmitters
Juga untuk Siemens SITRANS L Series: Petunjuk Pengoperasian yang Ringkas (45 halaman), Panduan Petunjuk Pengoperasian (33 halaman), Panduan Petunjuk Pengoperasian (50 halaman)
Halaman Cetak
4.2
Mounting instructions
Adhesive products
In adhesive and viscous media, the surfaces of the transmitter should protrude into
the vessel to avoid buildup. Therefore mounting bosses should not exceed a certain
length.
Figure 4.2
In horizontal pipelines, avoid mounting in the upper or lower area of the pipe.
In the upper part of the pipe cavities can form due to air inclusions.
Solids can settle in the lower pipe area. Both can lead to measurement errors.
In horizontal pipelines, lateral installation is therefore recommended.
1
2
3
Figure 4.3
Inflowing medium
If SITRANS LCS050 is mounted in the filling stream, unwanted false measurement
signals can be generated. For this reason, mount SITRANS LCS050 at a position in the
vessel where no disturbances, e.g. from filling openings, agitators, etc., can occur.
SITRANS LCS050
Operating Instructions, 02/2021,
A5E50859888
Adhesive products
Recommended mounting area
Not recommended - danger of air inclusions
Not recommended - Danger of buildup
Installation in horizontal pipelines
Installing/mounting
4.2 Mounting instructions
11