Siemens SITRANS L Series 사용 설명서 - 페이지 18

{카테고리_이름} Siemens SITRANS L Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITRANS L Series 44 페이지. Capacitance transmitters
Siemens SITRANS L Series에 대해서도 마찬가지입니다: 간결한 사용 설명서 (45 페이지), 사용 설명서 (33 페이지), 사용 설명서 (50 페이지)

페이지 인쇄
Siemens SITRANS L Series 사용 설명서
4.2

Mounting instructions

Adhesive products
In adhesive and viscous media, the surfaces of the transmitter should protrude into
the vessel to avoid buildup. Therefore mounting bosses should not exceed a certain
length.
Figure 4.2
In horizontal pipelines, avoid mounting in the upper or lower area of the pipe.
In the upper part of the pipe cavities can form due to air inclusions.
Solids can settle in the lower pipe area. Both can lead to measurement errors.
In horizontal pipelines, lateral installation is therefore recommended.
1
2
3
Figure 4.3
Inflowing medium
If SITRANS LCS050 is mounted in the filling stream, unwanted false measurement
signals can be generated. For this reason, mount SITRANS LCS050 at a position in the
vessel where no disturbances, e.g. from filling openings, agitators, etc., can occur.
SITRANS LCS050
Operating Instructions, 02/2021,
A5E50859888
Adhesive products
Recommended mounting area
Not recommended - danger of air inclusions
Not recommended - Danger of buildup
Installation in horizontal pipelines
Installing/mounting
4.2 Mounting instructions
11