Siemens SITRANS L Series Руководство по эксплуатации - Страница 18

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Переключатель Siemens SITRANS L Series. Siemens SITRANS L Series 44 страницы. Capacitance transmitters
Также для Siemens SITRANS L Series: Компактная инструкция по эксплуатации (45 страниц), Руководство по эксплуатации (33 страниц), Руководство по эксплуатации (50 страниц)

Печатать страницу
Siemens SITRANS L Series Руководство по эксплуатации
4.2

Mounting instructions

Adhesive products
In adhesive and viscous media, the surfaces of the transmitter should protrude into
the vessel to avoid buildup. Therefore mounting bosses should not exceed a certain
length.
Figure 4.2
In horizontal pipelines, avoid mounting in the upper or lower area of the pipe.
In the upper part of the pipe cavities can form due to air inclusions.
Solids can settle in the lower pipe area. Both can lead to measurement errors.
In horizontal pipelines, lateral installation is therefore recommended.
1
2
3
Figure 4.3
Inflowing medium
If SITRANS LCS050 is mounted in the filling stream, unwanted false measurement
signals can be generated. For this reason, mount SITRANS LCS050 at a position in the
vessel where no disturbances, e.g. from filling openings, agitators, etc., can occur.
SITRANS LCS050
Operating Instructions, 02/2021,
A5E50859888
Adhesive products
Recommended mounting area
Not recommended - danger of air inclusions
Not recommended - Danger of buildup
Installation in horizontal pipelines
Installing/mounting
4.2 Mounting instructions
11