Epson BrightLink Pro 1430Wi Panduan Instalasi - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Proyektor Epson BrightLink Pro 1430Wi. Epson BrightLink Pro 1430Wi 26 halaman. Control pad and touch unit
Juga untuk Epson BrightLink Pro 1430Wi: Memulai (6 halaman)

Halaman Cetak
A

Remove the cable cover

B
Attach the Control Pad
Attach the Control Pad with commercially available M4 × 20 mm screws (×4).
Warning
❏
Make sure the screws are not angled.
❏
Make sure the Control Pad is firmly attached.
❏
Do not attach the Control Pad with double-side tape or magnets.
❏
Check that the Control Pad is operating correctly before attaching it with the
screws.
❏
When installing the Control Pad on a table, attach the supplied rubber feet (x4) to
the base of the Control Pad to prevent it from slipping.