Epson BrightLink Pro 1430Wi 설치 매뉴얼 - 페이지 23
{카테고리_이름} Epson BrightLink Pro 1430Wi에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink Pro 1430Wi 26 페이지. Control pad and touch unit
Epson BrightLink Pro 1430Wi에 대해서도 마찬가지입니다: 시작하기 (6 페이지)
페이지 인쇄A
Remove the cable cover
B
Attach the Control Pad
Attach the Control Pad with commercially available M4 × 20 mm screws (×4).
Warning
❏
Make sure the screws are not angled.
❏
Make sure the Control Pad is firmly attached.
❏
Do not attach the Control Pad with double-side tape or magnets.
❏
Check that the Control Pad is operating correctly before attaching it with the
screws.
❏
When installing the Control Pad on a table, attach the supplied rubber feet (x4) to
the base of the Control Pad to prevent it from slipping.