Epson BrightLink Pro 1430Wi Instrukcja instalacji - Strona 23

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Projektor Epson BrightLink Pro 1430Wi. Epson BrightLink Pro 1430Wi 26 stron. Control pad and touch unit
Również dla Epson BrightLink Pro 1430Wi: Rozpocznij (6 strony)

Drukuj stronę
A

Remove the cable cover

B
Attach the Control Pad
Attach the Control Pad with commercially available M4 × 20 mm screws (×4).
Warning
❏
Make sure the screws are not angled.
❏
Make sure the Control Pad is firmly attached.
❏
Do not attach the Control Pad with double-side tape or magnets.
❏
Check that the Control Pad is operating correctly before attaching it with the
screws.
❏
When installing the Control Pad on a table, attach the supplied rubber feet (x4) to
the base of the Control Pad to prevent it from slipping.