Cisco 8832 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8832. Cisco 8832 20 halaman. Masergy ip conference phone
Juga untuk Cisco 8832: Panduan Utama Migrasi Firmware (31 halaman), Panduan Memulai Cepat (2 halaman), Manual (30 halaman), Panduan Instalasi (39 halaman), Panduan Memulai Cepat (16 halaman), Panduan Pemeliharaan (9 halaman), Mulai Cepat (2 halaman), Pengaturan (14 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Mulai Cepat (2 halaman), Manual (30 halaman)

Answer a Call Left on Hold for Too Long

When you've left a call on hold too long, you'll be notified with these cues:

• Single ring, repeating at intervals

• Flashing LED bar

• Visual notification on the phone screen

Procedure

Press Answer to resume the held call.

You can easily switch between active and held calls.

Procedure

Press Swap to switch to the held call.

Call Park

You can use your phone to park a call. You can then retrieve the call either from your phone or another phone,

such as a phone at a coworker's desk or in a conference room.

A parked call is monitored by your network so you won't forget about it. If the call remains parked for too long, you

hear an alert. You can then answer, decline to answer, or ignore the call on your original phone. You can also

continue retrieving it from another phone.

If you don't answer the call within a certain length of time, it's routed to voicemail or another destination, as set by

your administrator.

A parked call occupies one line.

You can park an active call that you answered on your phone and then use another phone to retrieve the call.

You can also park a call on your own phone. If so then you may not hear a recording.

You can park only one call at the call park number.

Before you begin

Your call must be active.

Procedure

Press Transfer

Step 1

Dial *62

Step 2

Your phone plays a recorded message that asks for the number of the parked call.

Wait to hear the parking slot #

Step 3

Hang up.

Step 4

Step 5 (Optional) Communicate the parked number to the person retrieving the call.

14 |

P a g e

Cisco IP Phone 8832 Series User Guide