Ricoh SP 311SFNw Panduan Memulai - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Memulai untuk Semua dalam Satu Printer Ricoh SP 311SFNw. Ricoh SP 311SFNw 47 halaman. Network settings guide
Juga untuk Ricoh SP 311SFNw: Panduan Instalasi Cepat (2 halaman), Spesifikasi (4 halaman), Spesifikasi (4 halaman), Panduan Instalasi (2 halaman)
Halaman Cetak
Note:
For NETGEAR routers, adding a WPS client (such as a printer) is performed through the
•
[ADVANCED] tab [WPS Wizard], as shown below.
f. Follow screen prompts to enter Client's (printer's) PIN, i.e., number you wrote down in step 1f.
3. On printer, press [Connect]. Display reads, PIN Executing....
4. When printer display reads, Connection to AP has Succeeded,
press [Exit] [Clear/Stop].
Note:
If the connection succeeds, an IP address has been assigned to the printer. To confirm, see
•
Appendix B: Print Configuration
If the connection fails, Connection to AP has Failed appears on the display, press [Exit] and
•
repeat from step 1. If the problem persists, contact 1-800-RICOH38 (742-6438), option #1.
5. Router web page should indicate, for example, "The wireless client [xyz] has been added to the
network successfully." Click [Logout].
6. Turn printer power switch Off. Wait a moment, and then turn On.
7. Check wireless connection status.
Display should read, Connected. To exit, press [Clear/Stop].
Note:
Also see
Appendix A: Check Wi-Fi Connection
•
8. Next, install Network Printer/Scanner Drivers. See
RICOH SP 311SFNw B&W Multifunction Laser Printer
Report.
Press [User Tools]
[Network Settings]
Status.
3.2 Network Quick
Getting Started Guide
[Wi-Fi]
[Wi-Fi Status].
Install.
13