Ricoh SP 311SFNw Başlangıç Kılavuzu - Sayfa 13

Hepsi Bir Arada Yazıcı Ricoh SP 311SFNw için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Ricoh SP 311SFNw 47 sayfaları. Network settings guide
Ayrıca Ricoh SP 311SFNw için: Hızlı Kurulum Kılavuzu (2 sayfalar), Teknik Özellikler (4 sayfalar), Teknik Özellikler (4 sayfalar), Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Note:

For NETGEAR routers, adding a WPS client (such as a printer) is performed through the

•

[ADVANCED] tab  [WPS Wizard], as shown below.

f. Follow screen prompts to enter Client's (printer's) PIN, i.e., number you wrote down in step 1f.

3. On printer, press [Connect]. Display reads, PIN Executing....

4. When printer display reads, Connection to AP has Succeeded,

press [Exit]  [Clear/Stop].

Note:

If the connection succeeds, an IP address has been assigned to the printer. To confirm, see

•

Appendix B: Print Configuration

If the connection fails, Connection to AP has Failed appears on the display, press [Exit] and

•

repeat from step 1. If the problem persists, contact 1-800-RICOH38 (742-6438), option #1.

5. Router web page should indicate, for example, "The wireless client [xyz] has been added to the

network successfully." Click [Logout].

6. Turn printer power switch Off. Wait a moment, and then turn On.

7. Check wireless connection status.

Display should read, Connected. To exit, press [Clear/Stop].

Note:

Also see

Appendix A: Check Wi-Fi Connection

•

8. Next, install Network Printer/Scanner Drivers. See

RICOH SP 311SFNw B&W Multifunction Laser Printer

Report.

Press [User Tools]

[Network Settings]



Status.

3.2 Network Quick

Getting Started Guide

[Wi-Fi]

[Wi-Fi Status].



Install.