Ricoh SP 311SFNw Manual de iniciação - Página 13

Procurar online ou descarregar pdf Manual de iniciação para Impressora tudo em um Ricoh SP 311SFNw. Ricoh SP 311SFNw 47 páginas. Network settings guide
Também para Ricoh SP 311SFNw: Manual de instalação rápida (2 páginas), Especificações (4 páginas), Especificações (4 páginas), Manual de instalação (2 páginas)

Note:

For NETGEAR routers, adding a WPS client (such as a printer) is performed through the

•

[ADVANCED] tab  [WPS Wizard], as shown below.

f. Follow screen prompts to enter Client's (printer's) PIN, i.e., number you wrote down in step 1f.

3. On printer, press [Connect]. Display reads, PIN Executing....

4. When printer display reads, Connection to AP has Succeeded,

press [Exit]  [Clear/Stop].

Note:

If the connection succeeds, an IP address has been assigned to the printer. To confirm, see

•

Appendix B: Print Configuration

If the connection fails, Connection to AP has Failed appears on the display, press [Exit] and

•

repeat from step 1. If the problem persists, contact 1-800-RICOH38 (742-6438), option #1.

5. Router web page should indicate, for example, "The wireless client [xyz] has been added to the

network successfully." Click [Logout].

6. Turn printer power switch Off. Wait a moment, and then turn On.

7. Check wireless connection status.

Display should read, Connected. To exit, press [Clear/Stop].

Note:

Also see

Appendix A: Check Wi-Fi Connection

•

8. Next, install Network Printer/Scanner Drivers. See

RICOH SP 311SFNw B&W Multifunction Laser Printer

Report.

Press [User Tools]

[Network Settings]



Status.

3.2 Network Quick

Getting Started Guide

[Wi-Fi]

[Wi-Fi Status].



Install.