Cisco 10008 Panduan Memulai Cepat - Halaman 39

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Router Jaringan Cisco 10008. Cisco 10008 49 halaman. Cisco systems router quick start guide

Halaman Cetak

Step 17 After you complete the configuration dialog, enter global configuration mode and enable IP routing by entering the

ip routing command:

Router(config)# ip routing

Basic Configuration in Global Configuration Mode

The following command sequence allows you to perform a configuration similar to that generated by the setup command:

Router> configure terminal

Router(config) # hostname c10008

Router(config) # enable secret my_router

Router(config) # enable password my_rtr

Router(config) # snmp-server community public

Router(config) # ip routing

Router(config) # interface FastEthernet0/0/0

Router(config-if) # no shutdown

Router(config-if) # media-type 100BaseX

Router(config-if) # half-duplex

Router(config-if) # ip address 3.5.3.45 255.255.0.0

Router # copy running-config startup-config

You can now configure the line cards. For specific information on system and interface configuration, see the

Router Line Card Configuration

Guide.

Cisco 10000 Series