Cisco 10008 Manual de início rápido - Página 39

Procurar online ou descarregar pdf Manual de início rápido para Router de rede Cisco 10008. Cisco 10008 49 páginas. Cisco systems router quick start guide

Imprimir página

Step 17 After you complete the configuration dialog, enter global configuration mode and enable IP routing by entering the

ip routing command:

Router(config)# ip routing

Basic Configuration in Global Configuration Mode

The following command sequence allows you to perform a configuration similar to that generated by the setup command:

Router> configure terminal

Router(config) # hostname c10008

Router(config) # enable secret my_router

Router(config) # enable password my_rtr

Router(config) # snmp-server community public

Router(config) # ip routing

Router(config) # interface FastEthernet0/0/0

Router(config-if) # no shutdown

Router(config-if) # media-type 100BaseX

Router(config-if) # half-duplex

Router(config-if) # ip address 3.5.3.45 255.255.0.0

Router # copy running-config startup-config

You can now configure the line cards. For specific information on system and interface configuration, see the

Router Line Card Configuration

Guide.

Cisco 10000 Series