Cisco 10008 빠른 시작 매뉴얼 - 페이지 39

{카테고리_이름} Cisco 10008에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 10008 49 페이지. Cisco systems router quick start guide

Step 17 After you complete the configuration dialog, enter global configuration mode and enable IP routing by entering the

ip routing command:

Router(config)# ip routing

Basic Configuration in Global Configuration Mode

The following command sequence allows you to perform a configuration similar to that generated by the setup command:

Router> configure terminal

Router(config) # hostname c10008

Router(config) # enable secret my_router

Router(config) # enable password my_rtr

Router(config) # snmp-server community public

Router(config) # ip routing

Router(config) # interface FastEthernet0/0/0

Router(config-if) # no shutdown

Router(config-if) # media-type 100BaseX

Router(config-if) # half-duplex

Router(config-if) # ip address 3.5.3.45 255.255.0.0

Router # copy running-config startup-config

You can now configure the line cards. For specific information on system and interface configuration, see the

Router Line Card Configuration

Guide.

Cisco 10000 Series