Cisco Nexus 1000V Panduan Penyebaran - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Penyebaran untuk Router Jaringan Cisco Nexus 1000V. Cisco Nexus 1000V 25 halaman. For microsoft hyper-v
Juga untuk Cisco Nexus 1000V: Panduan Penyebaran (49 halaman), Lembar data (8 halaman), Manual (6 halaman), Panduan Instalasi (27 halaman)
Halaman Cetak
Deployment Guide
Figure 2.
Proper Virtual Supervisor Module Networking Configuration
Note:
Please refer to the Cisco Nexus 1000V Series Switches installation guide for detailed VSM installation
instructions.
Control Interface
The control interface is a Layer 2 interface used to communicate with the VEMs. This interface handles low-level
control packets such as heartbeats as well as any configuration data that needs to be exchanged between the VSM
and VEM. Because of the nature of the traffic carried over the control interface, it is the most important interface in
the Cisco Nexus 1000V Series solution.
The control interface is always the first interface on the VSM and is usually labeled "Network Adapter 1" in the virtual
machine network properties.
Management Interface
The management interface is the interface that appears as the mgmt0 port on a Cisco switch. As with the
management interfaces of other Cisco switches, an IP address is assigned to mgmt0. Although the management
interface is not used to exchange data between the VSM and VEM, it is used to establish and maintain the
connection between the VSM and VMware vCenter Server.
The management interface is always the second interface on the VSM and is usually labeled "Network Adapter 2" in
the virtual machine network properties.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 9 of 25