- ページ 9

ネットワーク・ルーター Cisco Nexus 1000VのPDF 配備マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Nexus 1000V 25 ページ。 For microsoft hyper-v
Cisco Nexus 1000V にも：配備マニュアル (49 ページ), データシート (8 ページ), マニュアル (6 ページ), 設置マニュアル (27 ページ)

ページを印刷する

Deployment Guide

Figure 2.

Proper Virtual Supervisor Module Networking Configuration

Note:

Please refer to the Cisco Nexus 1000V Series Switches installation guide for detailed VSM installation

instructions.

Control Interface

The control interface is a Layer 2 interface used to communicate with the VEMs. This interface handles low-level

control packets such as heartbeats as well as any configuration data that needs to be exchanged between the VSM

and VEM. Because of the nature of the traffic carried over the control interface, it is the most important interface in

the Cisco Nexus 1000V Series solution.

The control interface is always the first interface on the VSM and is usually labeled "Network Adapter 1" in the virtual

machine network properties.

Management Interface

The management interface is the interface that appears as the mgmt0 port on a Cisco switch. As with the

management interfaces of other Cisco switches, an IP address is assigned to mgmt0. Although the management

interface is not used to exchange data between the VSM and VEM, it is used to establish and maintain the

connection between the VSM and VMware vCenter Server.

The management interface is always the second interface on the VSM and is usually labeled "Network Adapter 2" in

the virtual machine network properties.

Page 9 of 25