Cisco 7841 Panduan Referensi Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Referensi Pengguna untuk Sistem Konferensi Cisco 7841. Cisco 7841 5 halaman. Classroom phone
Juga untuk Cisco 7841: Catatan Rilis (16 halaman), Panduan Memulai Cepat (2 halaman), Panduan Referensi Cepat (4 halaman), Referensi Cepat (4 halaman), Instalasi Cepat & Panduan Pengguna (12 halaman), Panduan Referensi (11 halaman), Panduan Referensi Cepat (7 halaman), Panduan Referensi Cepat (7 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Manual (2 halaman), Manual (27 halaman), Panduan Utama Migrasi Firmware (31 halaman), Manual (43 halaman), Panduan Referensi Cepat (4 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Menggunakan (4 halaman), Panduan Pengguna Cepat (2 halaman), Manual (7 halaman), Manual (20 halaman), Panduan Fitur (4 halaman), Panduan Konfigurasi Ulang (2 halaman), Kartu Referensi Cepat (2 halaman), Panduan Instalasi Cepat (12 halaman), Panduan Memulai Cepat (2 halaman), Panduan Cepat (3 halaman), Kartu Referensi Cepat (2 halaman), Kartu Referensi Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Referensi Cepat (3 halaman)

To Park a call:

 During an active call, press the More soft key until you see the Park soft key.

 Press Park. The LCD screen displays the special call park number at which the

call is stored.

 Make a note of the call park number, then hang up. The call is parked at that

number, allowing you to retrieve it from another phone.

 To retrieve the parked call from any phone in the Cisco CallManager system, dial

the call park number at which the call is parked.

Call Pickup:

 Press the PickUp soft key. The call now rings on your phone.

 Select the Number to answer then press Answer and the call will go to your

phone

Forwarding Calls:

 Press the CFwdAll soft key. You should hear two beeps.

 Enter the number to which you want to forward all of your calls, exactly as you

would if you were placing a call to that number. (After you enter the number, an

animated phone icon with a flashing right arrow appears in the upper-right corner

of the LCD screen. The LCD screen also displays a message confirming the

number or extension to which your calls are being forwarded).



To cancel call forwarding, press the CFwdAll soft key.

Placing a Conference Call:

 During a call, press the More soft key and then the Confrn soft key. Doing so

automatically activates a new line and puts the first party on hold.

 Place a call to another number or extension.

 When the call connects, press Confrn again to add the new party to the

conference call.

 Repeat these steps to add parties to the conference call.

To Access Voice Mail internally:

 To set up and access voice mail, first press your line button

 Then press the Messages button on your Cisco IP Phone (teachers should then

press the * key) and follow the voice instructions.

 The default PIN is 12345.

 Remember there is a difference between your voicemail ID and your PIN.

 The first time you access your voice mail you will be walked through setting

up your voice mail.

To Access Voice Mail externally:

 Call Your Buildings Main Number and Press *

 Enter your ID (Your 4 digit extension or assigned voicemail extension).

 Enter your PIN.