Cisco TelePresence IX5200 Pengaturan Pertama Kali - Halaman 14
Jelajahi secara online atau unduh pdf Pengaturan Pertama Kali untuk Sistem Konferensi Cisco TelePresence IX5200. Cisco TelePresence IX5200 40 halaman.
Juga untuk Cisco TelePresence IX5200: Panduan Pengguna Mulai Cepat (15 halaman), Panduan Pengguna (26 halaman), Panduan Instalasi (36 halaman)
Halaman Cetak
Requirements for Whiteboards and Whiteboard Microphones
•
Figure 4
Examples of Correct and Incorrect Whiteboard Placement
Troubleshooting Whiteboard Setup Issues
If you encounter any problems with the whiteboard setup, check the following possible causes:
•
•
Cisco TelePresence IX5000 and IX5200 First-Time Setup
14
Good lighting improves the whiteboard image; poorly lit whiteboard areas can look grainy when
shared in a conference.
There is not enough contrast between the targets and the viewable area in the camera, due to poor
lighting in the whiteboard area. Ideally, the lux level in the whiteboard area should be the same level
as the rest of the room. If the whiteboard is placed in a dark corner of the room, not only can
whiteboard setup fail, but the whiteboard can look dark and grainy when it is shared, even if
whiteboard setup passes.
If you cannot fix the lighting, you can light the whiteboard area temporarily with an external lighting
source until first-time setup passes. However, note that a poorly lit whiteboard area looks poorly lit
when it is shared.
Something in the viewable camera area (for example, red ink on the whiteboard) is causing detection
issues between the whiteboard targets, which are red in color, and the whiteboard.
OL-27038-01