Cisco TelePresence IX5200 최초 설정 - 페이지 14

{카테고리_이름} Cisco TelePresence IX5200에 대한 최초 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence IX5200 40 페이지.
Cisco TelePresence IX5200에 대해서도 마찬가지입니다: 빠른 시작 사용 설명서 (15 페이지), 사용자 설명서 (26 페이지), 설치 매뉴얼 (36 페이지)

페이지 인쇄

Requirements for Whiteboards and Whiteboard Microphones

•

Figure 4

Examples of Correct and Incorrect Whiteboard Placement

Troubleshooting Whiteboard Setup Issues

If you encounter any problems with the whiteboard setup, check the following possible causes:

•

Cisco TelePresence IX5000 and IX5200 First-Time Setup

Good lighting improves the whiteboard image; poorly lit whiteboard areas can look grainy when

shared in a conference.

There is not enough contrast between the targets and the viewable area in the camera, due to poor

lighting in the whiteboard area. Ideally, the lux level in the whiteboard area should be the same level

as the rest of the room. If the whiteboard is placed in a dark corner of the room, not only can

whiteboard setup fail, but the whiteboard can look dark and grainy when it is shared, even if

whiteboard setup passes.

If you cannot fix the lighting, you can light the whiteboard area temporarily with an external lighting

source until first-time setup passes. However, note that a poorly lit whiteboard area looks poorly lit

when it is shared.

Something in the viewable camera area (for example, red ink on the whiteboard) is causing detection

issues between the whiteboard targets, which are red in color, and the whiteboard.

OL-27038-01