Cisco TelePresence IX5200 최초 설정 - 페이지 15
{카테고리_이름} Cisco TelePresence IX5200에 대한 최초 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence IX5200 40 페이지.
Cisco TelePresence IX5200에 대해서도 마찬가지입니다: 빠른 시작 사용 설명서 (15 페이지), 사용자 설명서 (26 페이지), 설치 매뉴얼 (36 페이지)
페이지 인쇄
Performing First-Time Setup
To set up your system for the first time, complete the following steps.
Log in to the IX5000 administration GUI using the following syntax:
Step 1
http://<ip-address>
Where
ip-address
Tip
If you did not make a note of the IP address and it no longer appears on the display, tap the number that
displays on the top left corner of the Touch 10 controller, then tap System Info.
Click First-Time Setup from the menu on the left.
Step 2
Click Start Setup.
Step 3
OL-27038-01
This problem is unlikely because to interfere with camera setup, the source of the interference would
have to be both red and rectangular in shape.
is the IP address you noted when the system was booting (see
Cisco TelePresence IX5000 and IX5200 First-Time Setup
Performing First-Time Setup
Figure 2
for an example).
15