Cisco TelePresence IX5200 Перше налаштування - Сторінка 15

Переглянути онлайн або завантажити pdf Перше налаштування для Конференц-система Cisco TelePresence IX5200. Cisco TelePresence IX5200 40 сторінок.
Також для Cisco TelePresence IX5200: Посібник користувача "Швидкий старт (15 сторінок), Посібник користувача (26 сторінок), Посібник з монтажу (36 сторінок)

Performing First-Time Setup

To set up your system for the first time, complete the following steps.

Step 1

http://<ip-address>

Where

ip-address

Tip

If you did not make a note of the IP address and it no longer appears on the display, tap the number that

displays on the top left corner of the Touch 10 controller, then tap System Info.

Click First-Time Setup from the menu on the left.

Step 2

Click Start Setup.

Step 3

OL-27038-01

This problem is unlikely because to interfere with camera setup, the source of the interference would

have to be both red and rectangular in shape.

is the IP address you noted when the system was booting (see

Cisco TelePresence IX5000 and IX5200 First-Time Setup

Performing First-Time Setup

Figure 2

for an example).