Cisco TelePresence IX5200 İlk Kez Kurulum - Sayfa 15
Konferans Sistemi Cisco TelePresence IX5200 için çevrimiçi göz atın veya pdf İlk Kez Kurulum indirin. Cisco TelePresence IX5200 40 sayfaları.
Ayrıca Cisco TelePresence IX5200 için: Hızlı Başlangıç Kullanım Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (26 sayfalar), Kurulum Kılavuzu (36 sayfalar)
Sayfayı Yazdır
Performing First-Time Setup
To set up your system for the first time, complete the following steps.
Log in to the IX5000 administration GUI using the following syntax:
Step 1
http://<ip-address>
Where
ip-address
Tip
If you did not make a note of the IP address and it no longer appears on the display, tap the number that
displays on the top left corner of the Touch 10 controller, then tap System Info.
Click First-Time Setup from the menu on the left.
Step 2
Click Start Setup.
Step 3
OL-27038-01
This problem is unlikely because to interfere with camera setup, the source of the interference would
have to be both red and rectangular in shape.
is the IP address you noted when the system was booting (see
Cisco TelePresence IX5000 and IX5200 First-Time Setup
Performing First-Time Setup
Figure 2
for an example).
15