Cisco TelePresence MX700 Panduan Instalasi - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Konferensi Cisco TelePresence MX700. Cisco TelePresence MX700 29 halaman. Single camera on a free standing floor stand or a floor stand secured to the wall
Juga untuk Cisco TelePresence MX700: Panduan Instalasi (32 halaman), Panduan Memulai Cepat (12 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (29 halaman), Panduan Instalasi (32 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco TelePresence MX700 Panduan Instalasi
Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
19

Start up the system

•
Remove the protection foil from the displays.
•
Make sure the camera can move freely.
•
Insert the network and power cables into the wall outlets.
•
Switch on the system.
The power switch is located directly below the codec, next to
the power connector.
Wait a few minutes while the system starts up. The start-up
may include automatic software upgrade and restart of
Touch controller and camera.
•
Follow the instructions on the Touch controller.
Cisco Webex: To find more information on how to get started,
visit
https://collaborationhelp.cisco.com
Started articles for room devices.
Other services: For further information on set-up and
configuration, download the Getting Started Guide from the
Cisco web site,
78-100218-03A0 | 2018 JUNE | © 2018 Cisco Systems, Inc. All rights reserved.
and look for Getting
https://www.cisco.com/go/mx-docs
Page 26