Cisco TelePresence MX700 Installatiehandleiding - Pagina 26

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco TelePresence MX700. Cisco TelePresence MX700 29 pagina's. Single camera on a free standing floor stand or a floor stand secured to the wall
Ook voor Cisco TelePresence MX700: Installatiehandleiding (32 pagina's), Snelstarthandleiding (12 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (29 pagina's), Installatiehandleiding (32 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco TelePresence MX700 Installatiehandleiding
Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
19

Start up the system

•
Remove the protection foil from the displays.
•
Make sure the camera can move freely.
•
Insert the network and power cables into the wall outlets.
•
Switch on the system.
The power switch is located directly below the codec, next to
the power connector.
Wait a few minutes while the system starts up. The start-up
may include automatic software upgrade and restart of
Touch controller and camera.
•
Follow the instructions on the Touch controller.
Cisco Webex: To find more information on how to get started,
visit
https://collaborationhelp.cisco.com
Started articles for room devices.
Other services: For further information on set-up and
configuration, download the Getting Started Guide from the
Cisco web site,
78-100218-03A0 | 2018 JUNE | © 2018 Cisco Systems, Inc. All rights reserved.
and look for Getting
https://www.cisco.com/go/mx-docs
Page 26