Cisco TelePresence MX700 설치 매뉴얼 - 페이지 26

{카테고리_이름} Cisco TelePresence MX700에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence MX700 29 페이지. Single camera on a free standing floor stand or a floor stand secured to the wall
Cisco TelePresence MX700에 대해서도 마찬가지입니다: 설치 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (12 페이지), 설치 매뉴얼 (28 페이지), 설치 매뉴얼 (29 페이지), 설치 매뉴얼 (32 페이지), 빠른 참조 매뉴얼 (2 페이지), 매뉴얼 (45 페이지), 매뉴얼 (45 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 시작하기 매뉴얼 (46 페이지)

페이지 인쇄
Cisco TelePresence MX700 설치 매뉴얼
Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
19

Start up the system

•
Remove the protection foil from the displays.
•
Make sure the camera can move freely.
•
Insert the network and power cables into the wall outlets.
•
Switch on the system.
The power switch is located directly below the codec, next to
the power connector.
Wait a few minutes while the system starts up. The start-up
may include automatic software upgrade and restart of
Touch controller and camera.
•
Follow the instructions on the Touch controller.
Cisco Webex: To find more information on how to get started,
visit
https://collaborationhelp.cisco.com
Started articles for room devices.
Other services: For further information on set-up and
configuration, download the Getting Started Guide from the
Cisco web site,
78-100218-03A0 | 2018 JUNE | © 2018 Cisco Systems, Inc. All rights reserved.
and look for Getting
https://www.cisco.com/go/mx-docs
Page 26