Cisco UC500 series Panduan Konfigurasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Sistem Konferensi Cisco UC500 series. Cisco UC500 series 50 halaman. Sip trunking unified communications 500 series

Halaman Cetak

1. Configuration Guide
2. Introduction
3. Installation
4. Initial Configuration
5. Access Uc500 Via Cli

4.3

Using CCA to configure the UC500 for SIP Trunking

4.3.1 With the UC500 in a default configuration, launch CCA on the workstation attached

to a FastEthernet port. CCA begins with a prompt to connect. Select

"Create

Community" to add this UC500 to a new community as follows:

Figure 4.3.1 Create community for CCA