Cisco UC500 series Panduan Konfigurasi - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Sistem Konferensi Cisco UC500 series. Cisco UC500 series 50 halaman. Sip trunking unified communications 500 series

Halaman Cetak

1. Configuration Guide
2. Introduction
3. Installation
4. Initial Configuration
5. Access Uc500 Via Cli

4.3.11 If the provider supplies NTP server information that can be configured in UC500

as well. Click on

"NTP"

at the bottom of the right pane & enter the IP address(es), Keys

& Encryption as defined by the provider – then click "OK". This configuration is

optional if no NTP is provided – in this case the UC500 clock is the system clock.

Figure 4.3.11 NTP settings

Click

"OK"

at the bottom of the pane – if a pop up comes up which states there is a need

to reload CUE – hit

"OK"

and disregard this for now.