Cisco ATA 191 Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco ATA 191. Cisco ATA 191 13 halaman. Analog telephone adapter
Juga untuk Cisco ATA 191: Panduan Pengguna (30 halaman), Panduan Administrasi (4 halaman), Panduan Pengguna (10 halaman), Memulai (8 halaman), Manual (10 halaman), Setup Manual (6 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (30 halaman)

Halaman Cetak
Cisco ATA 191 Panduan Memulai Cepat
Cisco ATA 191 Analog Telephone Adapter Overview
Table 1: ATA 191 Top Panel Items
Item
Power LED
Network LED
Phone 1 LED
Phone 2 LED
Problem Report Tool (PRT) Button
Problem Report Tool (PRT) LED
Description
Steady green: System booted up successfully and is ready for use.
Slow flashing green: System is booting up.
Fast flashing green three times, then repeats: System failed to boot
up.
Fast flashing green: The LED behaviour occurs in the following
situations:
• System detects a factory reset.
To perform a factory reset, press and hold the RESET button for
about 10 seconds.
• A factory reset is performed successfully.
Off: Power is off.
Flashing green: Data transmission or reception is in progress through
the WAN port.
Off: No link.
Steady green: On hook.
Slow flashing green: Off hook.
Fast flashing green three times, then repeats: The analog device failed
to register.
Fast flashing green: A factory reset is performed successfully.
Off: The port is not configured.
Press this button to create a problem report using the Problem Report
Tool.
This is not a power button. When you press this button, a
Note
problem report is generated and uploaded to a server for the
system administrator.
Flashing amber: The PRT is preparing the data for the problem report.
Fast Flashing amber: The PRT is sending the problem report log to
the PRT server.
Solid green for five seconds, then off: The PRT report was sent
successfully.
Fast flashing green: A factory reset is performed successfully.
Flashing red: The PRT report failed. Press the PRT button to turn the
LED off. Once it is off, another press triggers a new PRT report.
Cisco ATA 191 Analog Telephone Adapter Overview
ATA 191 Top Panel
5