Cisco TelePresence Server 7010 Manual Petunjuk Penggantian - Halaman 21
Jelajahi secara online atau unduh pdf Manual Petunjuk Penggantian untuk Perangkat Keras Jaringan Cisco TelePresence Server 7010. Cisco TelePresence Server 7010 23 halaman. 600w ac-input power supply and fan tray replacement
Juga untuk Cisco TelePresence Server 7010: Panduan Petunjuk Instalasi (15 halaman), Panduan Instalasi (14 halaman), Memulai (16 halaman), Manual Petunjuk Penggantian (18 halaman)
Halaman Cetak
The command show interfaces serial slot/port displays statistics for the specific serial interface you
specify by its slot/port address. If you use this command without the type and slot/port arguments,
the system will display statistics for all interfaces in the system.
Router> show int hssi 1/0
Hssi 1/0 is up, line protocol is up
Hardware is cxBus HIP
Internet address is 1.1.1.9, subnet mask is 255.255.255.0
(display text omitted)
The command show configuration displays the contents of the system configuration file stored in
NVRAM.
Router# show config
Using 1652 out of 130048 bytes
version 10.3(3)
!
hostname Router
!
enable-password guessagain
!
microcode TRIP flash trip1-0
microcode reload
!
interface hssi1/0
ip address 1.1.1.67
ip route-cache cbus
no keepalive
!
interface serial2/1
ip address 1.1.1.12
(display text omitted)
The command show protocols displays the global (system-wide) and interface-specific status of any
configured Level 3 protocol.
Router> show protocols
Global values:
Internet Protocol routing is enabled
Hssi1/0 is up, line protocol is up
(display text omitted)
Cisco 7010 and Cisco 7505 Chassis Replacement Instructions
Replacing the Chassis
21