Cisco TelePresence Server 7010 Manual de instrucciones de sustitución - Página 21

Navegue en línea o descargue pdf Manual de instrucciones de sustitución para Hardware de red Cisco TelePresence Server 7010. Cisco TelePresence Server 7010 23 páginas. 600w ac-input power supply and fan tray replacement
También para Cisco TelePresence Server 7010: Manual de instrucciones de instalación (15 páginas), Manual de instalación (14 páginas), Primeros pasos (16 páginas), Manual de instrucciones de sustitución (18 páginas)

The command show interfaces serial slot/port displays statistics for the speciﬁc serial interface you

specify by its slot/port address. If you use this command without the type and slot/port arguments,

the system will display statistics for all interfaces in the system.

Router> show int hssi 1/0

Hssi 1/0 is up, line protocol is up

Hardware is cxBus HIP

Internet address is 1.1.1.9, subnet mask is 255.255.255.0

(display text omitted)

The command show conﬁguration displays the contents of the system conﬁguration ﬁle stored in

NVRAM.

Router# show config

Using 1652 out of 130048 bytes

version 10.3(3)

hostname Router

enable-password guessagain

microcode TRIP flash trip1-0

microcode reload

interface hssi1/0

ip address 1.1.1.67

ip route-cache cbus

no keepalive

interface serial2/1

ip address 1.1.1.12

(display text omitted)

The command show protocols displays the global (system-wide) and interface-speciﬁc status of any

conﬁgured Level 3 protocol.

Router> show protocols

Global values:

Internet Protocol routing is enabled

Hssi1/0 is up, line protocol is up

(display text omitted)

Cisco 7010 and Cisco 7505 Chassis Replacement Instructions

Replacing the Chassis