Cisco C880 M4 Panduan Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Server Cisco C880 M4. Cisco C880 M4 48 halaman. System event log collection
Juga untuk Cisco C880 M4: Panduan Suplemen Servis (27 halaman), Panduan Pemasangan Perangkat Keras (23 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pembaruan Firmware (5 halaman)
Halaman Cetak
3.Operating and Indicator Elements
3.2.1.
Operating Status LEDs
–
Power supply status LED (green)
–
Ready status LED (green)
–
Fault status LED (amber)
–
Identification status LED
Fault clearing instructions can be found in the
Status LED
Color
Power supply
Green
Ready
Green
Fault
Amber
Identification
Blue
*:ServerView RAID Manager checks the system status every 60 seconds and it may take nearly this time
until blinking starts for warning (e. g. after removing a HDD). After clearing the error the firmware deletes
the Fault LED, but the RAID Manager may still indicate the old or signal a new warning and activates the
blinking again. When the reason for warning is omitted (e. g. the removed HDD is inserted again), the
RAID Manager stops blinking after a maximum of 60 seconds.
Operating
Meaning
ON
DC power ON
OFF
DC power OFF
ON
Normal operation
OFF
Not ready
OFF
No fault
ON
Error detected
Blinking*
ServerView RAID Manager created a warning
status for an error and it should be checked.
Blinking
Specifies the enclosure location
chapter "
Fault
Clearing" on page 37
of this manual.
13