Cisco C880 M4 Kullanım Kılavuzu - Sayfa 13
Sunucu Cisco C880 M4 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Cisco C880 M4 48 sayfaları. System event log collection
Ayrıca Cisco C880 M4 için: Servis Ek Kılavuzu (27 sayfalar), Donanım Kurulum Kılavuzu (23 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Ürün Yazılımı Güncelleme Kılavuzu (5 sayfalar)
Sayfayı Yazdır
3.Operating and Indicator Elements
3.2.1.
Operating Status LEDs
–
Power supply status LED (green)
–
Ready status LED (green)
–
Fault status LED (amber)
–
Identification status LED
Fault clearing instructions can be found in the
Status LED
Color
Power supply
Green
Ready
Green
Fault
Amber
Identification
Blue
*:ServerView RAID Manager checks the system status every 60 seconds and it may take nearly this time
until blinking starts for warning (e. g. after removing a HDD). After clearing the error the firmware deletes
the Fault LED, but the RAID Manager may still indicate the old or signal a new warning and activates the
blinking again. When the reason for warning is omitted (e. g. the removed HDD is inserted again), the
RAID Manager stops blinking after a maximum of 60 seconds.
Operating
Meaning
ON
DC power ON
OFF
DC power OFF
ON
Normal operation
OFF
Not ready
OFF
No fault
ON
Error detected
Blinking*
ServerView RAID Manager created a warning
status for an error and it should be checked.
Blinking
Specifies the enclosure location
chapter "
Fault
Clearing" on page 37
of this manual.
13