Cisco C880 M4 Bedieningshandleiding - Pagina 13
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Cisco C880 M4. Cisco C880 M4 48 pagina's. System event log collection
Ook voor Cisco C880 M4: Handleiding Service Supplement (27 pagina's), Hardware installatiehandleiding (23 pagina's), Snelstarthandleiding (2 pagina's), Handleiding voor firmware-update (5 pagina's)
Pagina afdrukken
3.Operating and Indicator Elements
3.2.1.
Operating Status LEDs
–
Power supply status LED (green)
–
Ready status LED (green)
–
Fault status LED (amber)
–
Identification status LED
Fault clearing instructions can be found in the
Status LED
Color
Power supply
Green
Ready
Green
Fault
Amber
Identification
Blue
*:ServerView RAID Manager checks the system status every 60 seconds and it may take nearly this time
until blinking starts for warning (e. g. after removing a HDD). After clearing the error the firmware deletes
the Fault LED, but the RAID Manager may still indicate the old or signal a new warning and activates the
blinking again. When the reason for warning is omitted (e. g. the removed HDD is inserted again), the
RAID Manager stops blinking after a maximum of 60 seconds.
Operating
Meaning
ON
DC power ON
OFF
DC power OFF
ON
Normal operation
OFF
Not ready
OFF
No fault
ON
Error detected
Blinking*
ServerView RAID Manager created a warning
status for an error and it should be checked.
Blinking
Specifies the enclosure location
chapter "
Fault
Clearing" on page 37
of this manual.
13